Tuesday, October 28, 2008


Today we started our metalwork module in the main campus. We started off by making a press handle.

In the metalwork module we have to make a guitar stand. We started by cutting a piece of metal at a angle of 30 degrees and 300-mm long. I then drilled two holes in the bars. I then had to get an angle of 58 degrees so that the guitar stand is at an angle. I placed it in a jig to make sure it was correctly fitting. 

1 comment:

LigOFE said...

i must say you are doing well aidan!!! i'm finding it hard to write everything.... keep up the good work!!